Table of Contents
Advertisement
3.3 Breaking Bluetooth
Holding down the magic key for at least five seconds or scanning the "Break Bluetooth
forcibly breaks the scanner's Bluetooth
Section 11.1.)
Breaking the Bluetooth
Note:
operation" QR Code symbol given in Section 11.2 and its procedure in Section 11.1.
3.4 Re-establishing Bluetooth
When the scanner's Bluetooth
or the magic key re-establishes the Bluetooth
The scanner as a slave waits for a connection request from the master; the scanner as a master connects to a target slave.
• When "Scan w/ Bluetooth
Section 11.2 and its procedure in Section 11.1, scan the Cancel "Scan w/ Bluetooth
set cancel and then press the trigger switch.
• When the scanner was turned off by an auto power-off, press the magic key.
• When the Bluetooth
trigger switch.
• When the "Reconnect request" dialog box is displayed by the configuration software (Scan Tune App), press the trigger
switch.
• When the battery is replaced, press the magic key.
3.5 Indication of Bluetooth
The scanner's indicator LED and beeper together indicate the status of the scanner's Bluetooth
When the trigger switch is held down:
Indicator LED
Red, flashing
Red, flashing twice
repeatedly
Not turn on
When the trigger switch is pressed and released:
Indicator LED
Blue, flashing rapidly
Blue, flashing slowly
®
Wireless Links
®
wireless link. (The QR Code symbol is given in Section 11.2 and its procedure in
®
wireless link does not disable the Bluetooth
®
Wireless Links
®
wireless link has been broken by any of the following operations, pressing the trigger switch
®
wireless link.
®
link broken" is set, scan the "Scan w/ Bluetooth
®
communications parameters are modified in the configuration software (Scan Tune App), press the
®
Wireless Link Status
Beeper
Silent
Beeper
Silent
®
interface. To disable it, scan the "End
Scanning was performed when there was a Bluetooth
link on enabling the link.
The scanner has scanned the "End operation" QR Code symbol.
Scanner power is off
The scanner, as a master, is searching for a connection target.
The scanner, as a slave, is waiting for the master to connect.
12
®
wireless link" QR Code symbol
®
link broken" QR Code symbol given in
®
link broken" QR Code symbol to
®
wireless link.
Scanner Status
Scanner Status
®
wireless
Advertisement
Table of Contents
