Denso SE1-QB User Manual page 72

Codabar (NW-7)
Items
Reading Codabar (NW-7)
Minimum number of readable digits
for Codabar (NW-7)
Maximum number of readable digits
for Codabar (NW-7)
Transmission of Start/Stop codes for
Codabar (NW-7)
Check digit method for Codabar
(NW-7)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Code 39
Items
Reading Code 39
Minimum number of readable digits
for Code 39
Maximum number of readable digits
for Code 39
Transmission of Start/Stop codes for
Code 39
Conversion to FULL ASCII
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable, without the check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
3 to 99 digits
(including start/stop codes)
Transmit a/b/c/d
Transmit A/B/C/D
Disable
MOD-16
7-check method
: Can be changed only with the configuration software.
Parameters
Enable, without the check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
1 to 99 digits
(including start/stop codes)
Enable
Disable
Enable
Disable
59
Defaults Refer to:

Section 11.2
4 digits
(See Note 1.)
99 digits

Section 11.2

Section 11.2
Defaults Refer to:

Section 11.2
1 digit
(See Note 1.)
99 digits
Section 11.2

Section 11.2
