Denso SE1-QB User Manual page 69

Items
Reading SQRC
SQRC Encryption key mismatch
SQRC Encryption key match
SQRC code,
minimum version readable
SQRC code,
maximum version readable
Reading iQR Code (square)
iQR code, (square)
minimum version readable
iQR code, (square)
maximum version readable
Reading iQR Code (rectangular)
iQR code, (rectangular)
minimum version readable
iQR code, (rectangular)
maximum version readable
Edit/Non-edit mode for Structured
Appended iQR Code
Reading Aztec (Full-range)
Aztec, (Full-range)
minimum layer readable
Aztec, (Full-range)
maximum layer readable
Reading Aztec (Compact)
Aztec, (Compact)
minimum layer readable
Aztec, (Compact)
maximum layer readable
(Note 1)
The parameter setting ranges are different from versions or code numbers that the scanner can actually read.
Parameters
Enable
Enable (SQRC symbol only)
Disable
Disable
Enable transmission of disclosure data only
Enable transmission of disclosed data +
undisclosed data
Enable transmission of undisclosed data only
Setting range 1-40
Enable
Disable
Setting range 1-61
Enable
Disable
Setting range 1-15
Edit mode
Non-edit mode
Enable
Disable
Setting range 1-32
Enable
Disable
Setting range 1-4
56
Defaults



1
40

1
61

1
15


1
15

1
4
: Can be changed only with the configuration software.
Refer to:
Section 7.7
Section 11.2
(See Note 1.)
Section 11.2
Section 11.2
(See Note 1.)
Section 11.2
Section 11.2
(See Note 1.)
Section 7.5
Section 11.2
Section 11.2
(See Note 1.)
Section 11.2
Section 11.2
(See Note 1.)