Denso SE1-QB User Manual page 58

Code 39
Read code data will be transmitted as is.
You can select whether or not to transmit the start/stop codes. Start/stop codes are "*".
Interleaved 2 of 5 and Standard 2 of 5
The scanner transmits read code data, starting from the character following the start code to the one preceding the stop code.
No start/stop codes will be transmitted.
Codabar (NW-7)
The scanner transmits read code data including the start/stop codes.
You can select whether or not to transmit the start/stop codes.
Code 128 (GS1-128 (EAN-128))
The scanner transmits read code data, starting from the character following the start code to the one preceding the check digit.
Start/stop codes, FNC codes, or the check digit will not be transmitted.
Note that FNC1 placed in character positions other than the 1st and 2nd ones from the start code will be converted to GS
(1Dh) and transferred.
Code 93
The scanner transmits read code data, excluding start and stop codes and the check digit.
GS1 DataBar (RSS)
Read code data will be transmitted as is.
FNC1 of GS1 DataBar Expanded (RSS Expanded) will be converted to GS (1Dh) and can be selectable from either
transferred or user selection.
GS1 DataBar (RSS) Composite symbols
Read code data will be transmitted as is.
UPC/EAN Composite symbols
Read code data will be transmitted as is.
You can select whether or not to transmit a check digit of the linear component (UPC/EAN).
45