Ice-O-Matic CIM2046 Technical & Service Manual page 60

ELEVATION SERIES CIM CUBERS EVAPORATOR REPLACEMENT
Drill out the rivets that are holding the top middle cross beam to have access to the two top rear
mounting screws. Remove the corresponding screw to the evaporator you are working on.
With all the retaining screws out, and everything disconnected you should now be able to rotate the
plate out of position for replacement with the new evaporator.
The new evaporator comes with two new side wall pieces . If replacing the left evaporator plate, you will
use the right interior wall. If replacing the right evaporator plate you will use the right side wall. These
new pieces have cut outs to accept the updated evaporator plate.
Interior Right Wall
Exterior Right Wall
58