Ice-O-Matic CIM2046 Technical & Service Manual page 56

ELEVATION SERIES CIM CUBERS
The new evaporator comes with two new side wall pieces. For a single evaporator unit you will only use
the exterior right side wall that comes in the kit to replace the existing right side wall. This will allow the
new evaporator to be installed without interfering with the plastics. It has cut outs to allow for the new
tubing routing. For reference, see the image labeled "Exterior Right Wall" in the dual evaporator replace‐
ment section for correct part identification.
EVAPORATOR REPLACEMENT
Remove the right hand side
wall and discard. You will
replace it with a new one
that is provided in the kit.
54