Ford 1996 Windstar Manual page 337

Adding Automatic Transaxle Fluid
The fluid type is stamped on the dipstick. Before adding any
fluid, be sure that the correct type will be used.
Add fluid in 1/2 pint (0.25 liter) increments through the filler
tube to bring the level to the correct area on the dipstick. If an
overfill occurs, excess fluid should be removed by a qualified
technician.
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
NOTE: Always use Motorcraft MERCON or equivalent
MERCON automatic transaxle fluid when you refill
your automatic transaxle fluid.
Brake Fluid
Your vehicle is equipped with a brake fluid level indicator in
the master cylinder which lights the BRAKE warning light on
the instrument panel when the brake fluid level is low.
Under normal circumstances, your vehicle should not use up
brake fluid rapidly. However, expect the level of the brake fluid
to slowly fall as you put more mileage on your vehicle and the
brake pads wear.
Check the brake fluid at least once a year. You can do this by
looking at the fluid level in the plastic reservoir on the master
cylinder. The fluid level should be at or near the MAX mark.
Brake fluid is toxic.
Servicing Your Windstar
RWARNING
337