Table of Contents
Advertisement
Stowing the spare tire
To raise the tire to the stowed position, lay the tire on the
1.
ground with the interior side facing up. Install the retainer
through the wheel center and slide the tire under the vehicle.
Fit the hex-shaped end of the wheel lug wrench over the hex
nut in the floor of the cargo area. Turn the wheel lug
wrench clockwise until the tire is raised to its original
position underneath the vehicle.
NOTE: The hex nut ratchets when the tire is raised to the
stowed position. It will not allow you to over-tighten.
Check for proper seating against the underbody supports
2.
and retighten if necessary.
Check the tire seating position for looseness and make
sure the tire is not too far forward to avoid axle contact.
Make sure spare tires and jacking equipment are stowed
and secured in the proper storage location.
Roadside Emergencies
RWARNING
RWARNING
279
Hide quick links:
Advertisement
Table of Contents
