Ford 1996 Windstar Manual page 220

Load discs into disc magazine slots (numbered 1 through 10)
3.
one at a time with labeled surfaces upward, starting with
bottom slot number 1 (Figure 3).
Insert loaded disc magazine into chamber unit with the
4.
arrow on top of the disc magazine pointing toward the
changer (Figure 4). Make sure magazine is fully inserted
into changer.
NOTE: To remove one or more compact disc(s) from the disc
magazine, push the corresponding lever(s) (numbered
1 to 10 on the side of the disc magazine) to the left.
Disc(s) will partially come out for easy removal.
218