Table of Contents
Advertisement
Electronic Sound Systems
How to fast forward or reverse your CD player
To quickly search for a particular point in a selection, press the
"FF" button (to fast forward) or the "REV" button (to reverse).
While either button is pressed, the disc goes forward or
backward at two different speeds depending on how long the
button is held down. (Pressing either button for more than
approximately three seconds will speed up the process.) Release
the button at the desired point (found by watching the elapsed
playing time in the display or by listening to the sound during
fast forward or reverse). When you have reached the beginning
of track 1, the CD player will begin playing.
When you have reached the end of the disc by keeping the fast
forward button pressed, the display will show "END" and the
player will go into pause mode. Push the "PLAY/STOP" button
to begin playing the first track of the disc, press the "REV"
button to back up from the end of the disc, or use the "SEEK"
function to locate a desired track.
Using the "SEEK" feature
Press the top ( a ) of the "SEEK" button once to repeat the
current playing selection. Press the bottom ( b ) of the "SEEK"
button to advance to the next selection.
Pressing and holding the top ( a ) or bottom ( b ) of the "SEEK"
button will scroll backward and forward respectively through
the tracks.
Using the "SCAN" function
Press the "SCAN/TUNE" button to enter the scan mode. Once
in the scan mode, press the top ( a ) or bottom ( b ) half of the
"SEEK" button to scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on each listenable
track for approximately eight seconds. This continues until you
press the "SCAN/TUNE" button a second time. While in the
scan mode, the display shows the current sampled track
number.
203
Hide quick links:
Advertisement
Table of Contents
