Table of Contents
Advertisement
How to tune radio stations
There are four ways for you to tune in a particular station. You
can manually locate the station using the "SCAN/TUNE"
button, "SEEK" the station, "SCAN" to the station or select the
station by using the memory buttons, which you can set to any
desired frequency. These four methods are described below.
Using the "TUNE" function
You can change the frequency up or down one increment at
a time (FM changes in increments of 200 kHz; AM changes
in increments of 10 kHz) by first pressing the
"SCAN/TUNE" button twice (display shows "TUNE"), then
— within approximately five seconds — pressing and
releasing either the right ( a ) or left ( b ) side of the "SEEK"
button. To change frequencies quickly, press and hold down
either the right or left side of the "SEEK" button.
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies in this section.)
Using the "SEEK" function
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right ( a ) side of the "SEEK" button to select the next
listenable station up the frequency band. Press the left ( b )
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
Electronic Sound Systems
209
Hide quick links:
Advertisement
Table of Contents
