Ford 1996 Windstar Manual page 175

Seat/Bed Conversion (If equipped)
2nd Row Seat
To convert the seat to a bed:
Unlatch the seat/bed lever, located on the right-hand side of
1.
the seat cushion by pushing down.
Push the seatback down and rearward by applying pressure
2.
at the top of the seatback until it latches.
The seat cushion will move forward when going from the seat
to the bed position.
2nd row seat (seat position)
To convert the bed to a seat:
While in front of the seat, pull the release lever up, slightly
1.
raise the seatback, then push the seat bottom rearward until
the seatback is in the full upright and locked position.
Features
173