Connecting Power Supply; Installing Sensor Probes - Hussmann KH14 Installation Manual

PRODUCT INSTALLATION MANUAL

Connecting Power Supply

•
The appliance must be installed so the power is accessible.
•
To ensure that the appliance is not accidentally switched off, connect unit to its own power source. Do not
connect any other appliance using this source
•
Size the cable according to AS3008 or relevant local standards. For power rating please refer to product
engineering datasheet for details.
Ensure the appliance is properly grounded (earthed).

Installing Sensor Probes

The KH14 range or cases have the probes pre fitted at the factory. Probe location as per Fig 9
Probe location:
1. Probe near shelf heater.
2. Probe near shelf light.
3. Probe near bottom heater element
_________________________________________________________________________________________________________________________
Page 9
CAUTION
Refer to relevant State or Territory legislation
relating to safe working heights.
Fig (9) Location of probe
KH14 SELF SERVE HOT FOOD
PROBE LOCATION
Hussmann