Connecting Power Supply - Hussmann DC-1 Series Installation Manual

PRODUCT INSTALLATION MANUAL
Connecting Power Supply (only for electronically controlled versions)
•
The appliance must be installed so the power is accessible.
•
To ensure that the appliance is not accidentally switched off, connect unit to its own power source. Do not
connect any other appliance using this source.
•
Size the cable according to AS3008 or relevant local standards. For power rating please refer to product
engineering datasheet for details.
•
Ensure the appliance is properly grounded (earthed).
•
The auxiliary power outlet supplied to the cabinet for use of scale stand or similar single phase appliances. The
current rating of the auxiliary appliance must be limited to the rated outlet.
_________________________________________________________________________________________________________________________
Page 20
DC13 COLD PLATE
Hussmann