Attaching Kickplates - Hussmann KH14 Installation Manual

PRODUCT INSTALLATION MANUAL

Attaching Kickplates

(This should be done after final Installation of Drainage connections)
Attach kickplates and, if required, silicon seal to the floor once installation is complete and drains checked for water leaks.
Front Panel
1. Attached front panel and align with front skid rail refer figure 7.
2. Push back panel into and over slot to clip in position.
3. Screw panel into side bracket.
4. Check front panel is securely in position.
Back Panel
1. Attached back panel and align with back skid rail refer figure 8.
2. Push back panel into and over slot to clip in position.
3. Screw panel into side bracket
4. Check back panel is securely in position.
_________________________________________________________________________________________________________________________
Page 8
Fig (7) Attached front panel
Fig (8) Attached back panel
KH14 SELF SERVE HOT FOOD
Hussmann