Connecting Power Supply - Hussmann austral DD DELI-1 Series Installation Manual

PRODUCT INSTALLATION MANUAL
Fig (16b) Drain trap orientation
3. Use foot mounted brackets or mounting bracket to the case to support PVC drain assembly weight (Refer to Fig
16b).
4. Test for leakage by pouring water down the drain and ensure trap is primed before starting refrigeration.
Connecting Power Supply (only for electronically controlled versions)
•
The appliance must be installed so the power is accessible.
•
To ensure that the appliance is not accidentally switched off, connect unit to its own power source. Do not
connect any other appliance using this source.
•
Size the cable according to AS3008 or relevant local standards. For power rating please refer to product
engineering datasheet for details.
Ensure the appliance is properly grounded (earthed).
_________________________________________________________________________________________________________________________
Page 18
CAUTION
Incorrectly installed drain traps will result in
adverse air leaking into the case.
DD13 2T SERVICE DELI
Hussmann