Table of Contents
Advertisement
Power Management > Power On Fuction> Button Only:
Disable Wake on KB/MS function. You can boot up your system by power but-
ton only.
Power Management > AC PWR Auto Recovery>
A traditional ATX system should remain at power off stage when AC power
resumes from power failure. This design is inconvenient for a network server or
workstation, without an UPS, that needs to keep power-on. This item is used
to solve this problem. Selecting On enabling system to automatically power-on
after AC power resumes; in the other hand, the system will remain power-off if
you select Off.
If Former-Sts (former status) option is selected, the system will power-on or
power-off based on the original state. Available options: Former-Sts, On, Off
30
Advertisement
Table of Contents
