Table of Contents
Advertisement
Chapter 3
Date(of Month) Alarm
The field specifies the date for Resume By RTC Alarm. Setting s: 0~31.
Time(hh:mm:ss) Alarm
The field specifies the time for Resume by Alarm. Format is <hour><minute>
<second>.
POWER ON Function
This controls which part and how the PS/2 mouse or keyboard can power
on the system. Setting s: Password, Hot KEY, Mouse Left, Mouse Right,
BUTTON ONLY and Keyboard 98.
KB Power ON Password
If POWER ON Function is se t to Password, then you can set a pas sword in
the field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assig n a hot key combina-
tion in the field for the PS/2 keyboard to power on the system. Setting s: Ctrl-
F1 throug h Ctrl-F12.
Power Again
This item specifies whether your system will reboot after a power failure or
interrupt o ccurs. Available se tting s are:
Power Off
Leaves the computer in the power off state.
Power On
Reboots the computer.
Last State
Restores the system to the status before power failure
or interrupt occured.
3-22
** Reload Global Timer Events **
Primary/Secondary IDE 0/1, FDD,COM,LPT Port, PCI PIRQ[A-D]#
The g lobal timer is the hardware timer that counts down to the power saving
modes. If the monitoring of the listed hardware peripherals or components is
enabled, they will awaken the system or reload the original count of g lobal timer
when they are accessed.
3-23
AWARD
BIOS Setup
®
Advertisement
Table of Contents
