Decommissioning; Disposal; Operation; Loading Merchandise - Hussmann DC-1 Series Installation Manual

PRODUCT INSTALLATION MANUAL

Decommissioning

Plan and risk assess the decommissioning process to include the following:
1. Isolate the case from both the refrigeration and electrical systems.
(Disconnection is to be undertaken by qualified persons only).
2. Removal of the case is to be in the reverse order of installation listed previously.

Disposal

Case disposal is to be carried out by the following:
1. Metal component removed and recycled.
2. Remaining by commercial waste management.

Operation

Loading Merchandise

Cases should only be stocked with merchandise for which they were manufactured as indicated by the case model number
DC13 Fish on the rating plate (see Fig (18): Rating Plate) that is typically located, on the rear back panel at the lower right
hand end as viewed by the operator.
Use only fittings and accessories supplied with the case or approved by Hussmann.
_________________________________________________________________________________________________________________________
Page 24
Fig (18): Rating Plate
CAUTION
Do not climb in or on the case as this may result
in personal injury and/or case damage.
DC13 COLD PLATE
Hussmann