Home Menu; Operating Instructions - Jacuzzi J-400 Series Installation Manual And Use & Maintenance

Home menu

The Home Menu, provides access to spa functions and program-
ming. Operation is made easy by the interactive control panel. If
there is no activity for 30 minutes, the LCD display will time-out
into a sleep mode. To reactivate the display, just tap the display
screen.
Home Menu Control Buttons
When a feature is on, the button will have a blue inner glow.
Temperature Control: Allows you to adjust the set tempera-
ture of the spa:
Increase the temperature by tapping (
increments.
Decrease the temperature by tapping (
increments.
Note: The temperature range for the spa is 18.33 to 40°C
(65 to 104°F).
Jet Button: Tap to access the menu to operate the jets
pump.
Light Button: Tap to access the menu to operate the
lighting options.
CLEARRAY Button: Tap to activate the CLEARRAY on
demand feature.
Settings Button: Tap to access the programming and
setting menus.
Music Button: Tap to access the menu to operate the
audio system and settings.
Note: If the spa does not have the stereo option, there
will not be a button on the control panel.
Error Indicator Icon: Displays when there is error mes-
sage that needs to be addressed. The icon will also ap-
pear under the Temperature reading as a reminder. To
view the error message, tap the icon shown.
Invert Button: Tap to invert the display image.
Heat ON Icon: Displays whenever the heater is on and
heating the water.
6:45p
100
) in 0,5 °C
) in 0,5 °C
Lock Button: Displays when one of the lock modes is
enabled.
Wi-Fi Icon: Displays when there is a Wi-Fi connection
to the home router (not available if SmartTub ™ system
is installed).
6:45 PM
Time Indicator: The time will always be shown when
the Home Menu is displayed. The appearance will vary de-
pending on whether the clock is set to a 12-Hour or 24-Hour
configuration. The default setting is 12-Hour.
Note: The time does NOT automatically adjust for daylight saving
time. The time must be manually adjusted.

Operating Instructions

ProTouch™ Control Panel
Your Jacuzzi spa is equipped with a ProTouch control panel; mas-
sage selectors, and air control knobs located on the top rim of the
spa. These controls let you operate many of the special functions
of your Jacuzzi spa.
Activating the Jets Pumps
From the Home Menu, tap (
The panel will display the Jets Pump Submenu.
Note: Once you enter the Jets Pump Submenu, all the pumps will ac-
tivate. You can turn off the jets pump by tapping the jets pump button.
6:45p
100
Jets Pump 1 Button
1
Jets Pump 2 Button
Jets Pump 3 Button (if applicable)
3
Back Button: Tap to go back to the previous menu.
Invert Button: Tap to invert the display image.
1. Tap the Jets 1 button to turn the pump #1 on and off.
2. Tap the Jets 2 button to turn the pump
#2 on and off.
3. Tap the Jets 3 button to turn the
pump #3 on and off.
When a jets pump is on, the button will
have a blue inner glow.
Note: Auto Turn Off — Anytime a pump
59
) to enter the Jets Pump Submenu.
JETS
1 2
ON OFF