Standard Programming Functions; Menu Programs Button - Jacuzzi LED Series Troubleshooting Manual

5.0 Standard Programming Functions

5.1 Menu Programs Button

• Follow the steps below to access the programming menus.
Menu button LED display
Press 1x
Press 2x
Press 3x
Press 4x
Press 5x
Menu name
Allows access to the programming menu for
the primary filtration that uses the circulation
Primary Filtration pump. Although the spa has a default setting
Menu this feature is programmable. While in this
menu, you can also program the Change Filter
Timer.
Allows access to the programming menu for
the secondary filtration that uses Jets Pump
1. These cycles are used to provide additional
Secondary Filtra-
skimming. Although the spa has a default set-
tion Menu
ting this feature is programmable.
Allows access to the CLEARRAY® bulb re-
placement countdown timer. Your spa is
equipped with the CLEARRAY system that
uses a UV bulb to purify the water. This bulb
must be replaced every year. By programming
the countdown timer, a reminder is displayed
CLEARRAY Menu
on the topside when it is time to replace the
bulb. The LED screen will flash between "blb"
and the set temperature. Additionally, the
CLEARRAY indicator light will blink. The timer
needs to be reset in order to clear the mes-
sage.
Allows access to the economy programming
menu. The economy feature has either an "on"
Economy Menu or "off" setting where the heater is allowed to
activate for a maximum of 30 minutes at the
end of each secondary filtration cycle.
Activates the locking modes to certain compo-
Lock Menu
nents, features or operations.
Menu Function
7