Protouch™ Glass Control Panel; Register Your New Spa; Home Menu - Jacuzzi J500 Installation - Use - Maintenance

ProTouch™ Glass Control Panel
Your Jacuzzi Spa is equipped with a state-of-the-art touch
screen control panel. The control panel complements the con-
temporary and sleek design of your spa. Access to all menus
can be achieved by using the touch screen. Programming fea-
tures can be easily programmed with our user-friendly design.
With the ease of use, there will more time to enjoy the bene-
fits of your spa.

Register Your New Spa

The Start up menu will time out after approximately 3 seconds
and then change to the display. Display for the control panel
will vary depending on the model.
Please register your spa at:
Once registered, enter your spa serial # and
registration passcode here:
enter #
In order to register you will need to have the spa serial number,
Then you will need to register online in order to receive a pas-
scode. The passcode must be entered on the control panel.
If this option is skipped, you will be able to activate components,
but, after 10 minutes, the components will turn off and the
screen will revert back to the registration screen. This process
will continue until the spa is registered and the passcode is en-
tered.
Note: The spa will still protect itself if an error is detected.
To register your spa you need to have your spa serial number.
The best time to retrieve the serial number is when the spa is
being connected.
Welcome
Rev 1.0
Reminder
www.jacuzzi.com
later
serial nameplate
Once you register your spa at www.Jacuzzi.com, you will be
given a passcode that will need to be entered into the control
panel.
Once you register your spa online, you can then enter the re-
gistration information into the control panel.
Note: If a number is entered wrong you can tap (
ve backward.
- From the registration screen, tap (
rial number.
- Input the 9-digit serial number.
set
- Tap ( ) to enter the information and proceed to enter the
passcode.
- Now input the 9-digit passcode, that was provided online when
you registered your spa.
set
- Tap ( ) to enter the information.
Enter Spa Serial #
1 2 3
4 5 6
7 8 9
0

Home Menu

The Home Menu, provides access to spa functions and pro-
gramming. Operation is made easy by the interactive touch-
screen control panel. If there is no activity for 5 minutes, the
LCD display will time-out into a sleep mode. To reactivate the
display, just swipe across the top from one corner to the other.
I
Home Menu Control Buttons
When a feature is on, the button will have a blue highlight a-
round it.
ON UV
96
Temperature Control: Allows you to adjust the set
temperature of the spa:
Increase the temperature by tapping
crements.
Decrease the temperature by tapping
crements.
Note: The temperature range for the spa is 18.33 to
40°C (65 to 104°F). To activate the Extended Tempe-
rature feature that allows the spa to reach 41°C
(106°F).
Jet Button: Tap to access the menu to operate the jets
pump.
40
enter #
) to enter the spa se-
Enter Passcode #
1 2
X
4 5
7 8
0
set
6:45 PM
(
(
X
) to mo-
3
X
6
9
set
) in 1° in-
) in 1° in-