Tiles Assembly (Perla 7.0); Removal/Assembly Of Metal/Tile Profiles (Perla 7.0) - Cadel LORD 7 Installer Manual

Fig. 38 - Remove the screws Fig. 39 - Remove the side panels
5.10 TILES ASSEMBLY (PERLA 7.0)
3
To disassemble the tiles, proceed as follows:
• Place the tiles on a worktop and set the tile support above it.
• Have the holes of the profile match those of the tiles and apply all the screws (see Fig. 40).
• For assembly on the stove, see the next chapter.
Fig. 40 - Tiles assembly
5.11 REMOVAL/ASSEMBLY OF METAL/TILE PROFILES (PERLA 7.0)
3
To disassemble the front profiles, proceed as follows:
• Undo the front screws of the profile (see Fig. 41).
• Open the panel and release the rear teeth (see Fig. 42).
• To assemble, proceed in reverse order.
21
STUFE A PELLET