Mounting The Stand (Accent At); Removal/Assembly Of Curved Side Panels (Chrome - Sound - Round - Floyd) - Cadel LORD 7 Installer Manual

Fig. 41 - Remove the screws Fig. 42 - Remove the profile

5.12 MOUNTING THE STAND (ACCENT AT)

• Proceed as follows to disassemble the stand:
• Lay the stove down on the ground.
• Remove the stove's feet.
• Secure the stand with the screws supplied (see Fig. 43).
Fig. 43 - Mounting the stand

5.13 REMOVAL/ASSEMBLY OF CURVED SIDE PANELS (CHROME - SOUND - ROUND - FLOYD)

To disassemble the side panels, proceed as follows:
• Unscrew the side screws (see Fig. 44).
• Open the side panel (see Fig. 45) and release the fastening teeth.
• To assemble, proceed in reverse order.
Fig. 44 - Unscrew the screws Fig. 45 - Release the side panels
22
STUFE A PELLET