Removal/Assembly Of The Frame; One At - Beam At - Accent At - Accent K At); Removal/Assembly Of Side Panels; Lord 7.0) - Cadel LORD 7 Installer Manual

5.5 REMOVAL/ASSEMBLY OF THE FRAME (SWEET
To assemble the frame, proceed as follows:
• Push the frame upwards and release the teeth (see Fig. 27).
• Remove the frame (see Fig. 28).
• To assemble the frame, proceed in reverse order.
Fig. 27 - Release the frame
5.6 REMOVAL/ASSEMBLY OF SIDE PANELS (SWEET
To disassemble the side panels, proceed as follows:
• Undo the rear screws (see Fig. 29).
• Open the side panel (see Fig. 30) and release the fastening teeth (see Fig. 31).
• To assemble, proceed in reverse order.
Fig. 29 - Remove the screws
5.7 REMOVAL/ASSEMBLY OF SIDE PANELS (CRISTAL
To disassemble the side panels, proceed as follows:
• Undo the front screws (see Fig. 32).
• Open the side panel (see Fig. 33) and release the rear teeth (see Fig. 34).
• To assemble, proceed in reverse order.
STUFE A PELLET

7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT K AT)

3
7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT K AT)
3
Fig. 30 - Release the side panels

7.0 - LORD 7.0)

3
Fig. 28 - Remove the frame
Fig. 31 - Fastening teeth
19