General Installation; Stove Door Removal/Installation - Cadel LORD 7 Installer Manual

Table of Contents

5.3

GENERAL INSTALLATION

• It is obligatory to install the stove away from walls and/or pieces of furniture, with a minimum air flow of 300 mm on the sides

and 200 mm on the back, to enable an eficient appliance cooling and a good distribution of heat in the room (see Fig. 23).

• If the walls are made up of flammable materials, check the safety distances (see Fig. 23).

• At maximum power check that the wall temperature does not ever exceed 80°C. If it would be necessary please install a fire

resistant plate on the concerned walls.

• In some countries also masonring load-bearing walls are considered flammable.

5.4

For some operations (e.g.: side panel assembly and cleaning) you must remove the stove door.

To remove the door:

• Open the door.

• Undo the screws from the upper hinge (see Fig. 24).

• Remove the hinge, keeping the door in position (see Fig. 25).

• Lift the door and release it from the lower hinge (see Fig. 26).

• To assemble, proceed in reverse order.

Fig. 24 - Removing the screws

Fig. 23 - General installation

LEGEND

Fig. 23

Stove

Minimum lateral distance = 300 mm

Minimum rear distance = 200 mm

Minimum front distance = 1000 mm

Fig. 25 - Remove the hinge

Fig. 26 - Remove the door

STUFE A PELLET

Table of Contents