Table of Contents
Advertisement
6.10 TILES ASSEMBLY (PERLA
7.0)
3
To disassemble the tiles, proceed as follows:
• Place the tiles on a worktop and set the tile support above it.
• Have the holes of the profile match those of the tiles and apply all the screws (see Fig. 40).
• For assembly on the stove, see the next chapter.
Fig. 40 - Tiles assembly
6.11 REMOVAL/ASSEMBLY OF METAL/TILE PROFILES (PERLA
7.0)
3
To disassemble the front profiles, proceed as follows:
• Undo the front screws of the profile (see Fig. 41).
• Open the panel and release the rear teeth (see Fig. 42).
• To assemble, proceed in reverse order.
Fig. 41 - Remove the screws
Fig. 42 - Remove the profile
6.12 MOUNTING THE STAND (ACCENT AT)
• Proceed as follows to disassemble the stand:
• Lay the stove down on the ground.
• Remove the stove's feet.
• Secure the stand with the screws supplied (see Fig. 43).
20
Stufe a pellet
Advertisement
Table of Contents
