Combustible Air Inlet For Sealed-Chamber; Installation; Introduction - Cadel LORD 7 Installer Manual

4.3 COMBUSTIBLE AIR INLET FOR SEALED-CHAMBER INSTALLATION
How to connect to the stove in the sealed chamber with concentric system:
• Connect the air intake pipe to the combustion air pipe of the stove and tighten everything with a clamp (see [Fig. 12).
5

INSTALLATION

5.1

INTRODUCTION

• The assembly position must be chosen depending on environment, outlet, chimney flue.
• Check with local authorities if there are any restrictive regulations which regard the combustible air inlet, room ventilation,
fume exhaust system together with chimney flue and chimney pot.
• Check if there is the combustible air inlet.
• Check the probable presence of other stoves or appliances which could depress the room.
• Check at switched on stove if there is the presence of CO in the room.
• Check if the chimney has the necessary draught.
• Check if during the fume passage all has been executed in safety (probable fume losses and distances from flammable mate-
rials, etc....).
• The installation of the appliance must enable an easy access for appliance, fume exhaust pipes and chimney flue cleaning.
• The installation must enable en easy access to the electric connection plug (see ELECTRIC CONNECTION a pag. 24).
• To install more appliances, the external air inlet must be correctly dimensioned (see FEATURES a pag. 33).
12
Fig. 12 - Phase1
STUFE A PELLET