Table of Contents
Advertisement
6.4
STOVE DOOR REMOVAL/INSTALLATION
For some operations (e.g.: side panel assembly and cleaning) you must remove the stove door.
To remove the door:
• Open the door.
• Undo the screws from the upper hinge (see Fig. 22).
• Remove the hinge, keeping the door in position (see Fig. 23).
• Lift the door and release it from the lower hinge (see Fig. 24).
• To assemble, proceed in reverse order.
Fig. 22 - Removing the screws
6.5
REMOVAL/ASSEMBLY OF SIDE PANELS (CRISTAL 9 - CRISTAL PLUS 9 - AMARANTO 9 - ELANE 9)
To disassemble the side panels, proceed as follows:
• Open the door.
• Undo the front screws (see Fig. 25).
• Open the side panel (see Fig. 26) and release the rear teeth (see Fig. 27).
• To assemble, proceed in reverse order.
16
Fig. 21 - General dimensions: Elane 9
LEGEND
Fig. 21
A
Exhaust fumes d.8 cm
B
Hole combustion air inlet d.6 cm
Fig. 23 - Remove the hinge
CRISTAL 9 - CRISTAL PLUS 9 - ICON PLUS 9 - AMARANTO 9 - LIFE 9 - STEEL 9 - ELANE 9
Fig. 24 - Remove the door
Advertisement
Table of Contents
