Installation Of Tee Fitting; 5.15 Installation Of Sharp Airtight Rear Exhaust; Sweet/Lord - Cadel LORD 7 Installer Manual

5.14 INSTALLATION OF TEE FITTING (EXCLUDING SOUND UP - CHROME AT - FLOYD MODELS)
3
For stoves with top exhaust, a tee fitting with inspection cap must be installed.
The tee fitting must be blocked with the supplied clamp (see Fig. 46 Fig. 47)
Fig. 46 - Tee fitting Fig. 47 - Tee fitting

5.15 INSTALLATION OF SHARP AIRTIGHT REAR EXHAUST

The SHARP stove can be installed also with the rear exhaust.
Install the supplied 20° elbow (see Fig. 48)
Fig. 48 - SHARP rear exhaust
5.16 INSTALLATION OF THE FUMES OUTLET CONCENTRIC PIPE SHARP/LEE/CRISTAL/ONE/BEAM/
ACCENT/PERLA/SWEET/LORD
Install the concentric pipe Ø 80/130 mm complete with T fitting (see Fig. 49)
Connect the combustion air pipe Ø 60 mm (see Fig. 50)
23
STUFE A PELLET