Lee At); Removal/Assembly Of Back Panels - Cadel LORD 7 Installer Manual

Fig. 32 - Remove the screws
5.8 REMOVAL/ASSEMBLY OF SIDE PANELS (SHARP AT - LEE AT)
To disassemble the side panels, proceed as follows:
• Unscrew the black rear profile (see Fig. 35)
• Fix it to the coloured side panel (see Fig. 36)
• Fix the complete side panel on the front and back (see Fig. 37)
• To assemble, proceed in reverse order.
Fig. 35 - Remove the black profile
5.9 REMOVAL/ASSEMBLY OF BACK PANELS (PERLA
To disassemble the back panels, proceed as follows:
• Undo the front screws of the black panel (see Fig. 38).
• Open the panel and release the rear teeth (see Fig. 39).
• To assemble, proceed in reverse order.
20
Fig. 33 - Rotate the side panels
Fig. 36 - Fix the coloured side panel
7.0)
3
Fig. 34 - Remove the side panels
Fig. 37 - Fix the complete side panel
STUFE A PELLET