FujiFilm FM-DP L Service Manual page 7

INSTALLATION CONTENTS
D
3. SYSTEM SETTINGS
E
006-252-05
06.30.01 FM3040
2.16 Checking Fan Operations
2.16.1 Checking Fan Operations of the Equipment
(check the operation of the FANJ1, FANJ3, FANG1 and FANG2.)
2.16.2 Checking the Operations of the Optical Transmission Unit Type-II Fan
(Refer to APPENDIX 2 OPTICAL TRANSMISSION UNIT TYPE-II)
2.17 Checking Voltage
2.17.1 Checking the Voltage of the Equipment Main Body
(Check theDC voltage by the check pin on the SCN11A board and
MTH11A board. Adjust the respective voltage by the trimmer on the power supply board.)
2.17.2 Checking the Voltage of the Optical Transmission Unit Type-II
(Check the DC voltage of the optical transmission unit type-II)
2.17.3 Checking the Voltage of the Sorter
2.18 Checking the Interlock
2.18.1 Checking the Upper Cover Interlock
2.18.2 Checking the Front Cover Interlock
2.18.3 Checking the Film Tray Interlocks
3.1 Setting the System Date and Time
3.2 Parameter Continuous Setting
3.3 Setting Input CH
FM-DP L Service Manual
B-12
FP3B0005.EPS
B-12