FujiFilm FM-DP L Service Manual page 6

INSTALLATION CONTENTS
C
2.13 Connecting Interface Cables
E-I/F
2.14 Checking the Power Supply Voltage
(Check the power supply voltage of the outlet.)
2.15 Power ON and Starting the M-Utility
2.15.1 Power ON
(Turn ON the power switch on the rear side of the
equipment, forthed stop switch and remote/local switch.)
2.15.2 Starting the M-Utility
2.15.3 Turning ON the Power of the Optical Transmission Unit Type-II
(Refer to APPENDIX 2 OPTICAL TRANSMISSION UNIT TYPE-II)
2.15.4 Turning ON the Sorter Power
D
006-252-02
10.22.99 FM2569
2.13.1 Connections for E-I/F Specifications
Connecting to FIX90A board
2.13.5 Connecting Interface Cables
Between the Sorter and Equipment
Imager
2.13.2 Connections for Imager
Specifications (FM-DP)
(Refer to APPENDIX 1 SETTING,
CONNECTING, ADJUSTING THE
IMAGE I/F BOARD.)
Connecting to HAV90A board
Connecting to HAV90B board
Connecting to DVI90A board
Connecting to DPI06A/DPI06B board
Connecting to OPR06A board
2.13.3 Connecting the Remote Panel
(FM-DP)
2.13.4 Connecting the Optical
Transmission Unit Type-II (FM-DP)
(Refer to APPENDIX 2 OPTICAL
TRANSMISSION UNIT TYPE-II)
FM-DP L Service Manual
B-11
FP3B0004.EPS
B-11