Table of Contents
Advertisement
INSTALLATION 7. CHECKING IMAGER CONNECTION
3M: M952
When the host can select 20 x 25 cm films using MSZ command
(1)
Start the maintenance mode from the remote panel.
(2)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(3)
Set the input channel of the host connected.
(4)
Select 20 x 25 cm size format to be used.
(5)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
When the host can not select 20 x 25 cm films using MSZ command
(1)
Start the maintenance mode from the remote panel.
(2)
Select the No. 15 software switch of the maintenance mode, and set the
input channels activating landscape format output and film size output, etc.
(3)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(4)
Set the input channel of the host connected.
(5)
Select 20 x 25 cm size format to be used.
(6)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
006-252-05
06.30.01 FM3040
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
"MAINTENANCE, Description of Software Switch (Utility-4. Software
switch)"
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
FM-DP L Service Manual
B7-8
B7-8
Advertisement
Table of Contents
