Table of Contents
Advertisement
INSTALLATION 7. CHECKING IMAGER CONNECTION
7.6
Settings to Use 20 x 25 cm Size Films in Host Control
Exposures
The following describes the settings for using 20 x 25 cm size films in host control
exposure. (Main unit software version B03 or later)
Fuji, Toshiba, Hitachi, 3M: P831, GE-H.S.A.
(1)
Start the maintenance mode from the remote panel.
(2)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(3)
Set the input channel of the host connected.
(4)
Select 20 x 25 cm size format to be used.
(5)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
Yokogawa
(1)
Start the maintenance mode from the remote panel.
(2)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(3)
Set the input channel of the host connected.
(4)
Select 20 x 25 cm size format to be used.
<NOTE>
The following 20 x 25 cm film size formats cannot be selected.
Portrait:
MP03: B2, MP08: B5
Landscape
ML03: C3, ML08: C6
(5)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
006-252-05
06.30.01 FM3040
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
FM-DP L Service Manual
B7-6
B7-6
Advertisement
Table of Contents
