Table of Contents
Advertisement
INSTALLATION 7. CHECKING IMAGER CONNECTION
SIEMENS (Protocol Type 0500, 0504)
When the host has compatibility with 20 x 25 cm film size format codes
(1)
Start the maintenance mode from the remote panel.
(2)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(3)
Set the input channel of the host connected.
(4)
Select 20 x 25 cm size format to be used from the following.
Portrait
MP01: C107, MP02: C207, MP03: C307, MP04: C407, MP06: C607, MP08:
C807, MP09: C907, MP12: C217, MP15: C517, MP16: C617
Portrait mix
MPM1: C097
Landscape
ML01: C106, ML02: C206, ML03: C306, ML04: C406, ML06: C606, ML08:
C806, ML09: C906, ML12: C216, ML15: C516, ML16: C616
Landscape mix
MLM1: C096, MLM2: C196, MLM3: C296, MLM4: C396
(5)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
When the host does not have compatibility with 20 x 25 cm film size format codes
(1)
Start the maintenance mode from the remote panel.
(2)
Select the No. 15 software switch of the maintenance mode, and set the
input channels activating landscape format output and film size output, etc.
(3)
Select "Default value" of the maintenance mode, and execute "Format se-
lection".
(4)
Set the input channel of the host connected.
(5)
Select 20 x 25 cm size format to be used.
(6)
Execute film output, and check that 20 x 25 cm film format is output nor-
mally.
006-252-05
06.30.01 FM3040
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
"MAINTENANCE, Description of Software Switch (Utility-4. Software
switch)"
"MAINTENANCE, [4] Setting Up Default Value (Default value)"
FM-DP L Service Manual
B7-7
B7-7
Advertisement
Table of Contents
