Mstflint: Verifying The Firmware Image - Nvidia MSTFLINT Manual

sg# mstflint -d
Image type:
FW Version:
FW Release Date:
Device ID:
Description:
image
GUIDs:
0002c9030abcdef3
MACs:
VSD:
PSID:
Method 2: Pre-burn an Image with Specific GUIDs/MACs for Each
Device
In this method, a "base" image is generated with arbitrary default GUIDs and then updated with the
correct GUIDs for each device.
To pre-burn an image with specific GUIDs/MACs for each device:
1. Per device, set the device specific GUIDs in the image.
mstflint -i ./fw-ConnectX3-rel.bin -guid
0x0002c9bcdef1
2. (Optional) After assembly, query the image on flash to verify there are no GUIDs on the
device.
sg# mstflint -i ./fw-ConnectX3-rel.bin -striped_image q
Image type:
FW Version:
FW Release Date:
Device ID:
Description:
image
GUIDs:
0002c9030abcdef3
MACs:
VSD:
PSID:
Now the fw-ConnectX3-rel.bin image can be pre-burned to the flash. After the
assembly, the device would be fully functional.

mstflint: Verifying the Firmware Image

To verify the FW image on the Flash, use the following command line:
# mstflint -d <device> verify
To verify the FW image in a file, use the following command line:
# mstflint -i <image file> v
where:
device
image file
Examples:
# mstflint -d 41:00.0 v
# mstflint -i ./image_file.bin verify
41:00.0 q
FS2
2.31.5050
4.5.2014
4099
Node
0002c9030abcdef0 0002c9030abcdef1 0002c9030abcdef2
n/a
MT_1090120019
-striped_image sg
FS2
2.31.5050
4.5.2014
4099
Node
0002c9030abcdef0 0002c9030abcdef1 0002c9030abcdef2
n/a
MT_1090120019
Flash device to verify.
Image file to verify.
Port1 Port2
0002c9bcdef1
0x0002c9030abcdef0
Port1 Port2
0002c9bcdef1
Sys
0002c9bcdef2
-mac
Sys
0002c9bcdef2
63