Nvidia MSTFLINT Manual page 33

Feature
IB Dynamically Connect
Configure the number of
allocated local DC
resources (DCR)
InfiniBand Boot
Settings: Sets the
partition key to be used
by PXE boot
1
Internal Settings :
Configures internal
settings of the HCA
Preboot Boot Settings:
Settings that control the
legacy option ROM
Parameter
PF_BAR2_ENABLE
Enables the physical function bar size.
PF_BAR2_SIZE
Sets the physical function bar size.
1
DCR_LIFO_SIZE
:
The amount of total DCRs available to
join linked-lists after hash DCRs
LOG_DCR_HASH_TABLE_SIZE
Log2 of the hash table size minus 1
4th Generation Parameters:
• BOOT_PKEY_P1
• BOOT_PKEY_P2
5th Generation Parameters:
• BOOT_PKEY
Partition key to be used by PXE boot
INT_LOG_MAX_PAYLOAD_SIZE
log2 of the maximal burst
length when accessing PCI translation
table
4th Generation Parameters:
• BOOT_VLAN_EN_P1
• BOOT_VLAN_EN_P2
5th Generation Parameters:
• BOOT_VLAN_EN
Disable/Enable VLAN mode for
network boot
BOOT_RETRY_CNT
Number of retries to attempt in case of
boot failure from port1/2.
LEGACY_BOOT_PROTOCOL_P1
LEGACY_BOOT_PROTOCOL_P2
Boot protocol for port1/2
Values
Values: Unsigned numerical
values
Values: Unsigned numerical
values
0 to 16777215 (maximal size may
be smaller depending on the
firmware)
0 to 31 (maximal size may be
smaller depending on the
firmware)
0-65535
0: Default
_4KB: 4KB burst length
AUTOMATIC: Default
False: Disable
True: Enable
0 to 7
7: infinite retries
None: None - disable legacy boot
PXE: PXE (DHCP/TFTP boot)
iSCSI: iSCSI
Both: PXE + iSCSI
33