Nvidia MSTFLINT Manual page 122

mst Added support for using ibnetdiscover in the 'mst ib add' command
mstburn Added support for VPD read/write
Rev. 2.7.0a
Bug Fixes See
Rev. 2.7.0
General Added support for Mellanox ConnectX®-3 and SwitchX™ silicon
devices
Added Secure host feature which enables ConnectX family devices
to block access to its internal hardware registers. The hardware
access in this mode is allowed only if a correct 64 bits key is
provided (see mstflint changes).
mstflint tools cannot run on a device with hardware access
disabled. This feature is enabled only with supporting firmware
Removed support for Itanium (ia64)
mstflint Added the following commands:
• enable/disable access to the hardware
• set/change the key used to enable access to the hardware
The ROM section in the image now contains multiple boot images.
Therefore the mstflint was modified to display information for all of
the images in the ROM section
Added support to display/burn UEFI ROM
Added support for burning firmware via Command Line interface on
SwitchX devices
mstburn Added option to add or replace a single keyword in the VPD writable
section (-vpd_set_keyword flag)
Added the option to set a binary VPD field data
mstflint Added the option --without-kernel which allows user to install
installation mstflint without the mst kernel
Rev. 2.6.2
mstflint RPM based installation:
installation
• Applications are installed using a pre-compiled binary
change
RPM
• Kernel modules are distributed as a source RPM and
compiled by the installation script
• Fast installation process
MFT Bug Fixes History
Windows
Windows
Linux
Linux
Linux
Linux
Linux
Linux
Linux
Linux
Linux
Linux
Linux
Linux
122