Added a new query to read thresholds and monitor the cable's
properties:
•
Temperature
•
Voltage
•
RX/TX powers
•
TX Bias
Added a new RAW format for printing the data of the cable's pages
using the "--raw/--format raw" flags.
mstconfig
Enabled mstconfig to work with a database that describes the meta
data of the TLVs configuration of fifth generation devices.
Added the following configuration TLVs to mstconfig:
•
MPFS
•
KEEP LINK UP
•
SW OFFLOAD CONF
mstreg
Added support for PPTT, PPRT and PPAOS access registers in
switches.
mstflint
Added support for viewing and changing OEMs' device flash
parameters using an IB device when using mstflint.
Rev. 4.4.0
mstfwreset
Added support for mstfwreset in PowerPC
mstconfig
Added the following new configurations:
•
Number of TCs
•
Number of VLs
•
Enable DCBX in CEE mode
•
Enable DCBX in IEEE mode
•
Allow the NIC to accept DCBX configuration from the
remote peer
•
Enable DCBX
•
Enable the internal LLDP client
•
Select which LLDP TLV will be generated by the NIC
General
Added support for all tools to work when the MST driver is not
installed
mstcables
Added support for dumping Mellanox cables EEPROM by mstdump/
mstdump tools
Added a new tool (mstcables) that reads/writes Mellanox cable
registers and queries the cables info
All
All
All
All
All
All
Linux
All
Linux
Linux
Windows
FreeBSD
Linux
Windows
FreeBSD
114