Nvidia MSTFLINT Manual page 115

Build Created one mstflint package for all 64 bits FreeBSD OSs
mstfwmanager Removed support for mstfwmanager_pci tool (it is deprecated),
_pci since all the Linux tools can work without a kernel now. When
required, use mstfwmanager instead.
mcra Added support for clearing VSEC PCI semaphore by the mcra tool.
The new capability can be used after killing a tool forcefully without
clearing the semaphores.
Supported devices: ConnectX-4, ConnectX-4 Lx and Connect-IB
mstreg Added support for Switch-IB, Switch-IB 2 and Spectrum in the
mstreg tool
mstconfig Added the mstconfig tool to the mstflint package for WinPE
mstconfig Added a backup command in mstconfig which allows user to save
backup of the non-volatile configurations in a RAW file. This file can
be set on the device by using the set_raw command
Build Added support for running wrapped python tools (like fwtrace) in
PPC64, PPC64LE and Arm platforms
mstreg Added support for PPRT and PPTT registers in ConnectX-4 and
ConnectX-4 Lx
Rev. 4.3.0
General Added support for Spectrum device.
Added support for Switch-IB 2 device.
Added support for ConnectX-4 and ConnectX-4 Lx in VMware Esxi.
Added support for VMware ESXi 5.5 Native.
4th generation and 5th generation IC devices are now also named
Group I ICs and Group II ICs, respectively.
mstconfig Added support for setting some of the parameters in textual values
in addition to numerical values.
Added new configurations:
• The PF log bar size
• The VF log bar size
• The number of PF MSIX
• The number of VF MSIX
• port owner
• Allow RD counters
• IP protocol used by flexboot
FreeBSD
Linux
All
All
Windows
All
Linux
All
All
All
VMware ESXi
VMware ESXi
N/A
All
All
115