Nvidia MSTFLINT Manual page 47

Feature
1
POWER CONF
1
PCI CONF
Parameter
ADVANCED_POWER_SETTINGS
Enable manual override for the default
power settings. When Set, additional
power settings parameter in
NV_POWER_CONF are valid and
configurable. When cleared, additional
power settings parameter in
NV_POWER_CONF are ignored.
DISABLE_SLOT_POWER_LIMITER
When cleared, the device is not
allowed to consume more than 25W
from the PCIe power rails, unless a
PCI slot power limit message which a
new power limit is received. When set,
the slot power limiter is disabled, and
the device is allowed to consume more
than 25W from the PCIe power rails.
Note: if the power limiter is active and
there is not enough power, the device
will shut down the network modules.
SW_RECOVERY_ON_ERRORS
RESET_WITH_HOST_ON_ERRORS
ADVANCED_PCI_SETTINGS
Show advanced PCI settings.
FORCE_ETH_PCI_SUBCLASS
Force the PCI function identify with
Ethernet subclass (00h).
Supported only when
ADVANCED_PCI_SETTINGS is set.
IBM_CAPI_EN
Enable IBM's Coherent Accelerator
Processor Interface (CAPI) mode.
Supported only when
ADVANCED_PCI_SETTINGS is set.
IBM_TUNNELED_ATOMIC_EN
EXP_ROM_PXE_ENABLE
Values
True
False
True
False
True
False
True
False
True
False
True
False
True
False
True
False
True
False
47