Nvidia MSTFLINT Manual page 106

Burning MFA2 Enables the user to extract (i.e. unzip) 4MB images from MFA2
Images archive, that matches the device type and device PSIB.
If there are more than one matching image, the user may use
latest
image from the user menu.
Note: This feature is enabled when the "enable-fw-mgr" flag is set
at the configure steps (see
For further information see
Verifying MFA2 Enables the user to verify that a given MFA2 archive contains the
Archive image that matches the given device.
Note: This feature is enabled when the "enable-fw-mgr" flag is set
at the configure steps (see
For further information see
Binary Image Enables the user to verify a firmware image on a device which
Comparison operates in livefish mode by comparing it with an existing binary
firmware file. For further information see
Image.
SDK Added two new libraries to the WinMFT package for developing
software that interacts with Mellanox devices
The new SDK includes the mtcr and fastfwreset libs and headers.
mstresourcedu Extracts and prints data segments generated by the firmware. It is
mp supported in 5th generation NIC's devices.
The dump output is used by Mellanox for debug and
troubleshooting. For further information see
Utility.
Note: This utility is supported only on Python 3.0 and up.
mstlink Added the option of using "--json" flag. The output of the tool when
using this flag includes all options & commands in JSON format
and prints it.
mstreg Added a new registry key: NCFG.
This register is used to enable/disable device features and it is
supported when
For further information see
Dynamic MSI-X Dynamic MSI-X allocation capability allows users to control the
Allocation number of MSI-X vectors allocated to a Virtual Function, thus,
improve performance in guests systems.
For further information of how to set this capability, see the
"DYNAMIC_VF_MSIX_TABLE" parameter, in
Configurations and
Fast Firmware Added support for a fast firmware reset (< 1 second) to ConnectX-5
Reset adapter cards.
flag and burn the latest firmware, or choose the required
Flags
Burning the MFA2
Flags
Verifying MFA2
ICMD_QUERY_CAPABILITY.ncfg_reg==1.
mstreg Utility
Rev. 4.13.0
Parameters.
Dependencies)
Images.
Dependencies)
Archive.
Comparing the Binary
mstresourcedump
section MFT Supported
All
–
All
Linux/
FreeBSD
Windows
Linux
Windows
All
Windows
Windows
106