8
|
Operation
To adjust the louvers (vertical blades)
8.3 To operate the system
Installer and user reference guide
32
a
b
a Cooling operation
b Heating operation
INFORMATION
For setting procedure of the vertical airflow direction, see the reference guide or the
manual of the used user interface.
2 Horizontal airflow
▪
Horizontal airflow: by manually adjusting position of the vertical blades (louvers).
1 Adjust horizontal blades using the user interface so you can easily access the
knobs on the vertical blades.
2 Hold knobs and move them down slightly.
3 Adjust left or right to the desired position while holding the knobs.
a Knobs
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
INFORMATION
For setting of the operation mode or other settings, see the reference guide or
operation manual of the user interface.
a
a
FAA71+100BUV1B
Split system air conditioner
4P654517-1 – 2021.03