10
|
Maintenance and service
10.2.3 To clean the air filter
Installer and user reference guide
36
3 Clean the front panel. Wipe it with a soft cloth soaked in water by using only
neutral detergent.
4 Wipe panel with a dry soft cloth and let it dry up in the shade.
5 Attach the front panel. Align the hooks of the front panel with the slots and
push them all the way in.
6 Close the front panel slowly.
NOTICE
Do NOT use water of 50°C or higher. Possible consequence: Discoloration and
deformation.
When to clean the air filter:
▪
Rule of thumb: Clean every 6 months. If the air in the room is extremely
contaminated, increase the cleaning frequency.
▪
Depending on the settings, the user interface can display the "Time to clean
filter" notification. Clean the air filter when the notification is displayed.
▪
If the dirt becomes impossible to clean, change the air filter (= optional
equipment).
How to clean the air filter:
1 Open the front panel. Hold the front panel by the panel tabs on both sides
and open until the panel stops.
a Panel tab
2 Remove the air filter. Push up the tab in the center of the air filter slightly
then pull the air filter out in a downward direction.
a
FAA71+100BUV1B
Split system air conditioner
4P654517-1 – 2021.03