To Hook The Unit On The Mounting Plate; To Pass The Pipes Through The Wall Hole - Daikin FAA71BUV1B Installer And User Reference Manual

16 | Unit installation

16.3.4 To hook the unit on the mounting plate

16.3.5 To pass the pipes through the wall hole

Installer and user reference guide
58
1 Remove the front panel
2 Set the indoor unit on the mounting plate hooks. Use the " " marks as a
guide.
3 Place piece of packing material for support.
a
b c d
a Front grille
b Refrigerant piping
c Tab 2×
d Mounting plate (accessory)
e Piece of packing material
1 Connect the drain piping
piping "17 Piping installation" [
4
installation" [ 67].
2 Shape the refrigerant pipes along the pipe path marking on the mounting
plate.
3 Fix the electrical wiring and the refrigerant pipes together using vinyl tape
(field supply).
a b d c
a Drain hose
b Wall hole
c Refrigerant piping
d Electrical wiring
e Vinyl tape (field supply)
f Power supply wiring
g Transmission wiring and user interface wiring
NOTICE
▪
Do NOT bend refrigerant pipes.
▪
Do NOT push the refrigerant pipes onto the bottom frame or the front grille.
("16.2.1 To remove the front
e
"16.3.6 To provide
4
62] and the electrical wiring
A
A
e
panel" [ 4 52]).
4
drainage" [ 59], the refrigerant
"18 Electrical
f c g
FAA71+100BUV1B
Split system air conditioner
4P654517-1 – 2021.03