Transporting The Machine - Ricoh GR-C1 Series Service Training

Transporting the Machine

The following should be done before transporting the
machine.
1. Move the ITB lock lever down to the shipping position. This
moves the ITB away from the K PCDU.
2. Do SP 4806-001 to move the scanner carriage from the
home position. This prevents dust from falling into the
machine during transportation.
3. Remove the toner bottles. This prevents toner flow into the
toner supply tube, which is caused by vibration during
transport. This can also cause the tube to be clogged with
toner.
4. Make sure there is no paper left in the paper trays. Then
fix down the bottom plates with a sheet of paper and tape.
5. Attach securing tape to stop the waste toner bottle from
coming out.
6. Do one of the following:
» Attach shipping tape to the covers and doors.
» Shrink-wrap the machine tightly.
Slide 97
97
GR-C1 Training