Ricoh GR-C1 Series Service Training page 71

Enhanced Print Functions using HDD
Changing Print Settings on the operation panel
When "Sample Print", "Locked Print", "Hold Print"
or "Stored Print" is selected in printer drivers,
users can change the print settings such as
number of copies, color/monochrome, duplex,
staples and so on at the operation panel before
printing.
Please note that users can't use the operation
panel to change the print settings of jobs that are
stored in Mandatory Hold Print mode.
Color print jobs can be printed in B&W by
changing the print setting on the operation panel,
but the reverse is not available.
Slide 71
Print settings cannot be changed when print jobs are sent via Centronics
interface, USB or Bluetooth.
Security
71
GR-C1 Training