Ricoh GR-C1 Series Service Training page 88

GR-C1 Training
Optional One-bin Tray Unit
Points to note:
The unit comes with a mounting frame [10] and 4 covers. Two of these
covers [6, 7] replace existing covers on the machine, and two [8, 9] are
additional covers needed after installing the unit.
The cables [A] and [B] in the diagram must be routed below the cable [D].
Connect cable [B] as shown in the diagram. Do not connect it obliquely, or
the scanner unit could be damaged.
Slide 88
No additional notes
88