Ricoh GR-C1 Series Service Training page 216

Off mode is used only if no printer/scanner or fax
unit is installed.
The machine enters off mode when one of the
following is done.
When the machine enters auto off mode, no
power is supplied to the printing engine, and
almost none to the controller.
Recovery time
Slide 216
No additional notes
2. Energy Saving
2.2 Energy Saver Mode: Off Mode – 1
The auto off timer runs out after the last job.
The energy saver switch is pressed to turn the
power off.
10 seconds
216
GR-C1 Training